Equipment financing soft costs can sometimes be financed alongside the asset itself. Freight, sales tax, installation, testing, and certain one-time software or training charges may be considered when they are clearly connected to identified equipment and supported by itemized documentation.
Table of Contents
- What May Fit an Equipment-Finance Request, and What Usually Does Not
- Classify the Budget Before Choosing a Funding Structure
- Equipment Financing Soft Costs: A Cost-by-Cost Guide
- Why Itemization Matters
- Eligibility Is Not the Same as Payment Timing
- A Simple Sources-and-Uses Schedule
- Example: An Installed Manufacturing Cell
- Match the Funding Structure to the Project
- Tax Treatment Is a Separate Decision Track
- Protect the Budget Against Change Orders
- Questions to Resolve Before Signing a Purchase Order
- Build the Full Budget Before Seeking Funding
- Frequently Asked Questions
- Sources
That does not make every project expense an equipment-finance expense. Major building work, recurring subscriptions, payroll, inventory, and launch-period reserves usually need to be budgeted separately. Depending on the project, those costs may require borrower cash, a working-capital facility, or a broader loan structure.
“Soft costs” is a project-budget term, not a standardized financing or tax category. The useful distinction is between costs needed to acquire and place equipment into service, costs tied to the facility, and ordinary operating needs.
What May Fit an Equipment-Finance Request, and What Usually Does Not
Some lenders and lessors evaluate an installed equipment package rather than the machine alone. For example, U.S. Bank’s equipment financing page says certain transactions may include a limited amount of installation, tax, and freight. First Financial Bank describes programs that can include equipment, software, installation, delivery, tooling, and training.
Those are examples of program variation, not a universal rule. A cost can be necessary to a project and still fall outside a particular equipment-finance agreement because of its size, useful life, payment timing, or relationship to the asset.
Keep four questions separate:
- Is the expense part of the full project budget?
- Could it be included in an asset’s accounting or tax cost basis?
- Will the proposed lender or lessor consider it under the selected program?
- Can the expense be paid when it is due under that program’s disbursement process?
IRS Publication 551 says the cost of purchased property includes sales tax, freight, installation, and testing, among other items. That is relevant to tax basis. It does not obligate a lender to finance those charges.
Classify the Budget Before Choosing a Funding Structure
Start by separating the project into practical buckets. The equipment itself may include a machine, vehicle, imaging device, production line, hardware, or tools. Ancillary costs are the charges that deliver, set up, and make that asset usable, such as crating, rigging, calibration, commissioning, or initial operator training.
Facility work belongs in a different bucket. Electrical service upgrades, concrete pads, plumbing, ventilation, structural work, room shielding, trenching, and renovations may be essential to the project, but they can also be construction or leasehold-improvement costs. They should not be buried in a machine quote.
Then there are operating needs: payroll during ramp-up, inventory, recurring software subscriptions, maintenance agreements, marketing, rent, and cash reserves. These costs may support the project’s success, but they are not the same as the durable equipment being acquired.
Equipment Financing Soft Costs: A Cost-by-Cost Guide
This table is a planning framework, not an approval list. The asset, vendor, documentation, payment schedule, and financing product all matter.
| Cost category | Typical review posture | Documentation to provide | Key distinction |
|---|---|---|---|
| Equipment | Commonly reviewable | Itemized quote, specifications, serial numbers if available | Asset condition, useful life, vendor, ownership structure, and resale value can affect the transaction. |
| Freight, shipping, crating, delivery | Often reviewable with the asset package | Freight quote or separate invoice line | Keep equipment delivery separate from a broader relocation or logistics project. |
| Rigging, assembly, anchoring, installation | May be reviewable with documentation | Statement of work, site plan, milestone schedule | A large contractor scope can look more like construction than equipment deployment. |
| Testing, calibration, commissioning | May be reviewable with documentation | Acceptance criteria, scope, final-payment schedule | The final invoice may not be due until delivery, installation, or acceptance is documented. |
| Tooling and integration | May be reviewable with documentation | Equipment-linked quote and ownership description | Custom or short-lived components can receive different treatment from the core equipment. |
| One-time software license and implementation | May be reviewable with documentation | Order form, license terms, implementation scope | A perpetual or one-time license differs materially from recurring SaaS. See computer software financing and leasing. |
| Initial vendor training | May be reviewable with documentation | Training scope and itemized invoice | Ongoing education, employee wages, and travel should be planned separately. |
| Sales or use tax | May be reviewable with documentation | Tax calculation and vendor invoice | Tax-basis treatment does not determine financing eligibility. |
| Permits, inspections, and site work | Often needs separate evaluation | Permit schedule, contractor bid, drawings, lease or ownership details | The cost may relate to equipment, construction, or leasehold improvements. |
| Payroll, inventory, recurring subscriptions, maintenance, marketing | Typically operating or recurring | Cash-flow forecast and working-capital budget | These are better identified as working-capital needs than folded into the equipment purchase. |
Why Itemization Matters
Providers generally need to understand what is being purchased, who will be paid, when payment is due, and how each charge connects to the finished system. A named machine with a vendor quote is straightforward to describe. An open-ended contractor scope or a three-month payroll reserve is a different credit and collateral question.
Transparent documents make that distinction easier. Ask vendors to show equipment, freight, installation, software, training, taxes, and contractor work as separate lines, even if they sell the project as turnkey. Combining every charge into the equipment price may make an invoice look simpler, but it does not answer the underlying eligibility questions.
For each line item, retain the quote or contract, payment terms, delivery or installation milestones, and any acceptance requirements. License rights also matter for software. A financed asset and a revocable subscription do not present the same ownership profile.
Eligibility Is Not the Same as Payment Timing
Many funding gaps arise from timing rather than category. A manufacturer may require a deposit at order. Freight may be due before shipment. A rigger could bill on delivery, while an installer invoices after a later milestone. Final payment may depend on acceptance testing, inspection, or retainage.
A cost might be acceptable in principle but impractical in a structure that disburses only once, at delivery. Before signing a purchase order, establish how the proposed funding path handles deposits, direct vendor payments, multiple vendors, progress invoices, reimbursement, final acceptance, and change orders.
In the SBA 7(a) context, SBA Form 1050 documents disbursements under the loan authorization and borrower contributions. Conventional equipment loans and leases use different paperwork, but the same discipline helps: keep invoices, proof of any cash contribution, and a reconciled use-of-proceeds schedule.
A Simple Sources-and-Uses Schedule
A sources-and-uses schedule gives the buyer, vendors, and prospective capital providers one shared view of the project. It should identify the payee, amount, due date, supporting document, and expected funding source for every material cost.
| Source document | Payee | Amount | Timing or milestone | Financing discussion point |
|---|---|---|---|---|
| Machine vendor quote | Equipment vendor | $[amount] | Deposit and shipment | List model, accessories, known serial numbers, and deposit terms. |
| Freight invoice | Carrier or vendor | $[amount] | Before shipment or at delivery | Show whether freight is vendor-billed or payable to a separate carrier. |
| Installer statement of work | Installer or integrator | $[amount] | Installation milestones | Separate assembly and commissioning from construction-related work. |
| Software order form | Software provider | $[amount] | License date and implementation milestones | Separate one-time license and implementation charges from subscriptions. |
| Contractor bid | Electrical or general contractor | $[amount] | Progress draws | Flag facility improvements and identify any permit or inspection dependencies. |
| Tax estimate | Vendor or taxing authority | $[amount] | Purchase or delivery | Show the calculation and who collects the tax. |
| Borrower cash contribution | Business | $[amount] | Before or alongside funding | Identify costs the business will pay directly, including contingency if applicable. |
Keep change-order procedures, insurance requirements, delivery terms, service agreements, and acceptance criteria with this schedule. If several vendors are involved, add a short note explaining how their scopes combine into the completed system.
Example: An Installed Manufacturing Cell
Consider a fictional fabricator purchasing a machine, freight, rigging, anchoring, installation labor, commissioning, one-time controls software, implementation, training, sales tax, an electrical upgrade, a permit, and three months of launch payroll.
The machine and its documented delivery, rigging, installation, commissioning, one-time controls software, implementation, initial training, and sales tax are reasonable items to present for review as part of an equipment-package request. Whether any are included depends on the specific transaction.
The electrical upgrade and permit need their own treatment because they may be part of a broader facility scope. Launch payroll is a working-capital item, not equipment collateral. The same distinction applies to an imaging project: delivery, installation, software integration, and startup training may be documented with the equipment, while room shielding, electrical work, and staffing reserves should be separately budgeted.
Match the Funding Structure to the Project
| Structure | Potential fit | Payment mechanics to examine | Boundary to keep in view |
|---|---|---|---|
| Equipment loan or EFA | Specified equipment and related charges accepted by the provider | Vendor documentation, deposits, and payment timing | Not every service, facility cost, or operating expense will fit. |
| Equipment lease | Equipment and permitted delivered-solution costs | Vendor invoicing and lessor payment process | Software rights, services, and facility work may be treated differently. |
| Vendor financing | A single vendor’s system, accessories, and services | Deposit and invoice process | Independent contractors and operating costs may fall outside the vendor program. |
| Equipment line of credit | Phased eligible equipment purchases | Draw timing and documentation | Confirm treatment of deposits and non-equipment uses. See equipment lines of credit. |
| SBA 7(a) | Mixed projects involving equipment purchase or installation and working capital | Documented uses of proceeds and required borrower contribution | Available only through participating lenders and subject to SBA and lender requirements. |
| SBA 504 | Qualifying fixed assets and long-lived machinery or equipment | Program participant and project documentation requirements | SBA says 504 cannot be used for working capital or inventory. |
| Term loan | Defined business-investment needs, depending on the provider | Permitted uses, collateral, and funding timing | Fit depends on the mix of assets, services, and operating needs. |
| Working-capital facility | Payroll, inventory, recurring expenses, and ramp-up needs | Availability, repayment, and permitted-use terms | Durable asset purchases may need their own funding source. |
SBA 7(a) loans are a useful comparison for a project that combines equipment and operating needs. SBA says 7(a) proceeds may be used for working capital and for purchasing and installing machinery and equipment. Actual eligibility and documentation remain subject to the program and participating lender.
SBA 504 financing has a narrower role. SBA identifies long-lived machinery and equipment with at least 10 years of remaining useful life as an eligible use, while excluding working capital and inventory. It is not a solution for payroll, inventory, recurring subscriptions, or all startup costs.
For many mixed projects, two sources are cleaner than one: asset financing for the durable equipment package, then cash or a working-capital facility for payroll, inventory, subscriptions, and contingency. Explore working-capital options when the operating budget is material.
Tax Treatment Is a Separate Decision Track
Publication 551 includes sales tax, freight, installation, and testing in the cost of purchased property. A CPA may consider those amounts when determining basis, but that analysis does not establish collateral value, lender eligibility, loan terms, lease treatment, or current-year deductibility.
Software requires particular care. IRS Publication 946 discusses machinery and equipment as tangible personal property and addresses circumstances in which off-the-shelf computer software can qualify as Section 179 property. The result depends on the taxpayer, the software rights, the transaction, and current tax law. Review the final quote and license agreement with a CPA or tax adviser before relying on a tax outcome.
Protect the Budget Against Change Orders
Freight can rise, site conditions can change, permits can delay completion, and acceptance testing can postpone a final invoice. An approved amount does not necessarily increase when the project budget changes.
Before closing, set a process for revised scopes and costs. Document the change order, obtain a revised invoice, determine whether the added cost can be reviewed under the proposed structure, and reserve cash or another source if it cannot. For relocation, rigging, and phased commissioning projects, planning financing for smooth production transfers may help identify operational issues beyond the purchase price.
Questions to Resolve Before Signing a Purchase Order
- Which itemized charges can be considered with the equipment, and which need a different source of funds?
- Are freight, tax, rigging, installation, testing, software, implementation, tooling, and training subject to caps or special documentation?
- Can the structure accommodate a deposit, separate vendors, progress invoices, retainage, or reimbursement?
- What proof of delivery, installation, acceptance, insurance, and borrower contribution is required before payment?
- How should contractor work, permits, and facility improvements be classified?
- What is the fallback plan for a delay, change order, or cost overrun?
Build the Full Budget Before Seeking Funding
Map the whole project before paying a nonrefundable deposit. Include equipment, every vendor scope, taxes, facility work, payment milestones, working-capital needs, contingency, and planned borrower cash. The goal is not to force every cost into equipment financing. It is to prevent a predictable funding gap.
For general asset-finance mechanics, start with equipment financing and leasing education. A business line of credit may be worth evaluating for eligible short-term or variable expenses outside the asset package. Once the budget is complete, the business funding calculator can help with scenario planning.
Mulah is a business funding platform, not a bank. Available options and terms depend on the applicant, transaction, product, state, and participating capital provider. The final offer or agreement identifies the capital provider and governing terms. See Mulah’s funding information for additional context.
Educational information only. Funding products, terms, costs, eligibility, and availability vary by applicant, provider, product, jurisdiction, and time. This article is not a guarantee of approval, funding, pricing, legal advice, or tax advice.
Frequently Asked Questions
Can equipment financing include shipping, freight, and sales tax?
It may be possible when the charges are itemized and directly connected to acquiring identified equipment. A provider may apply separate eligibility rules, limits, and payment requirements.
Can an equipment loan cover installation, rigging, software, and training?
Some programs may consider documented installation, delivery, one-time software, implementation, tooling, or initial training as part of an installed equipment package. Recurring SaaS, ongoing training, employee wages, and travel should be budgeted separately.
Can equipment financing cover electrical upgrades, concrete work, or site preparation?
These costs should be evaluated separately from the equipment purchase. Electrical, concrete, plumbing, ventilation, shielding, trenching, structural work, and renovations may involve construction, facility, or leasehold-improvement scopes.
Can an equipment lender pay a deposit or multiple vendors?
Sometimes, but payment mechanics vary. Confirm the rules for deposits, direct payments, staged draws, reimbursement, final acceptance, and change orders before committing to vendor contracts.
Can SBA loans fund equipment installation and working capital?
SBA says 7(a) loans may be used for equipment purchase and installation as well as working capital, subject to program and lender requirements. SBA says 504 financing can support qualifying long-lived machinery and equipment, but not working capital or inventory.
Sources
- Internal Revenue Service, Publication 551: Basis of Assets
- Internal Revenue Service, Publication 946: How To Depreciate Property
- U.S. Small Business Administration, 7(a) loans
- U.S. Small Business Administration, 504 loans
- U.S. Small Business Administration, Form 1050 settlement sheet information
- U.S. Bank, Equipment Financing & Loans
- First Financial Bank, Equipment Leasing & Financing


